There are many fine sounding vacuum tube direct boxes on the market. However, in our listening tests, none of them compare to the air and depth delivered by the Fatboy Tube DI. Simplicity and perfection meet.

As veteran recording and design engineers, we knew what we wanted to hear when we set out to bring the Fatboy Tube DI to the audio recording community. We, like many of you, have been missing the richness and definition of sound in most modern recording equipment.

The Fatboy Tube DI has become the vaccum tube direct injection box by which all others are measured.

FATBOY TUBE DI FEATURES:

• Vacuum Tube (Valve) based Direct Injection Box (DI)

• Discrete electronics

• Compact & Rugged

• Hand Built in the USA

• Transformer Balanced LoZ XLR Outputs (Line Level and Mic Level)

• Pin 1 Ground Lifts

• WIll drive line level direct to converters and DAWs, no mic preamp needed
  
  FATBOY TUBE DI SPECIFICATIONS:

  • Frequency Response 7Hz – 30kHz +/- 1 dB

  • Input impedance: 1M ohms

  • Gain range: 27-28dB

  • Maximum Output Before Clipping +18 dBu

  • Noise (EIN): less than -113dB

  • Distortion: Less than 0.15% 1KHz 1V

  • Power Requirements: 100/120/VAC – 18W (24VAC)

  • Dimensions (W x H x D) 5.4” x 2.6” x 8” • Weight 5 lb. (2.27 kg.)

"Our acoustic guitars have never sounded better!" ~ Kenny Loggins & Scott Bernard

ReThinking How an Active DI Can Sound

The Teegarden Audio Magic DI is a transformerless, balanced, active, direct injection device that offers maximum headroom, low distortion and pristine sound quality. It can accept input levels from passive guitar pickups or piezo transducers up to line level console or preamp levels (-40dBu to 0dBu).

The Magic DI was fine tuned to excel on acoustic guitar & stringed instruments, but sounds equally stellar on keyboards and bass guitar.

The flexible Combo XLR/1/4" input jack, combined with the Pad and the Active Buffered Thru can be used to reduce line level signals to instrument level and function as a ReAmp type device.

Pure. Simple. It's Magic!

MAGIC DI FEATURES:

• All Discrete Design

• Transformerless balanced XLR Output

• +48v Phantom Powered

• 2 Thru Outputs - Active Buffered and Parallel

• Combo 1/4" & XLR Input Jack

• High Pass Filter (Low Cut) -3dB Corner @ 50 Hz, -20dB @ 20 Hz

• -15 dB Capacitive Pad

• Ground Lift

• Hand Built in the USA
  
  MAGIC DI SPECIFICATIONS:

  • Frequency Response 20Hz – 20kHz (+/- .5 dB)

  • Input Impedance 1000 MOhms

  • THD+N: <.02% 1KHz 1V

  • Power Requirements: 48v Phantom from mic preamp or console

  • Current Draw: less than 10mA

  • Dimensions (4 x 5 x 1.7 inches)

There are many fine sounding vacuum tube direct boxes on the market. However, in our listening tests, none of them compare to the air and depth delivered by the Fatboy Tube DI. Simplicity and perfection meet.

As veteran recording and design engineers, we knew what we wanted to hear when we set out to bring the Fatboy Tube DI to the audio recording community. We, like many of you, have been missing the richness and definition of sound in most modern recording equipment.

The Fatboy Tube DI has become the vaccum tube direct injection box by which all others are measured.

FATBOY TUBE DI FEATURES:

• Vacuum Tube (Valve) based Direct Injection Box (DI)

• Discrete electronics

• Compact & Rugged

• Hand Built in the USA

• Transformer Balanced LoZ XLR Outputs (Line Level and Mic Level)

• Pin 1 Ground Lifts

• WIll drive line level direct to converters and DAWs, no mic preamp needed
  
  FATBOY TUBE DI SPECIFICATIONS:

  • Frequency Response 7Hz – 30kHz +/- 1 dB

  • Input impedance: 1M ohms

  • Gain range: 27-28dB

  • Maximum Output Before Clipping +18 dBu

  • Noise (EIN): less than -113dB

  • Distortion: Less than 0.15% 1KHz 1V

  • Power Requirements: 100/120/VAC – 18W (24VAC)

  • Dimensions (W x H x D) 5.4” x 2.6” x 8” • Weight 5 lb. (2.27 kg.)

Microphone Preamps are the hammers of the recording process. We set out to build a better hammer. This is not a a cheap copy of the preamp de jour or a vintage clone. It does have roots in vintage design practices and superior building techniques; featuring quality parts that have undergone extensive R&D listening tests. The only transformer in the audio path is the mic input transformer, much like the legendary Martin Sound MSS-10 and The Mastering Lab Pre. The Magic Pre shares the same design heritage as these world class units.

The Magic Pre 2100 is a two channel discrete Class A Mic Preamp that accurately captures the true essence and quality of fine instruments and voices. The biggest feature is there is not a bunch of unneeded fluff and features to take its toll on the sound. Nothing gets in the way of your sound! Pure and simple, the Magic Pre 2100.

You won't find an all discrete mic pre at this price and with this sound anywhere else on the market.

MAGIC Pre 2100 FEATURES:

• All Discrete Class A Classic Design

• Not a clone

• High quality, accurate, Sifam VU Meters

• +48v Phantom Power (decouples completely from transformer)

• -20 dB Pad (complete bypass in off position)

• Silver Teflon & Mogami™ Interconnect wire where applicable

• Hand Built in the USA

• Only the highest quality electronic parts that vetted by years
  of triple blind R&D listening tests
  
  MAGIC PRE 2100 SPECIFICATIONS*:

  • Frequency Response 5Hz – 35kHz (+/- 1 dB)

  • Gain range: 55dB

  • Maximum Output +24 dBu

  • Noise (EIN): less than -121dB

  • THD+N: <.02% 1KHz 1V

  • Power Requirements: 100/120/220/240 VAC

  • Dimensions (19 x 1.75 x 9)
    

  *Due to possible improvements, upgrades or availability of components, all specifications are subject to change.

There are many fine sounding vacuum tube direct boxes on the market. However, in our listening tests, none of them compare to the air and depth delivered by the Fatboy Tube DI. Simplicity and perfection meet.

As veteran recording and design engineers, we knew what we wanted to hear when we set out to bring the Fatboy Tube DI to the audio recording community. We, like many of you, have been missing the richness and definition of sound in most modern recording equipment.

The Fatboy Tube DI has become the vaccum tube direct injection box by which all others are measured.

FATBOY TUBE DI FEATURES:

• Vacuum Tube (Valve) based Direct Injection Box (DI)

• Discrete electronics

• Compact & Rugged

• Hand Built in the USA

• Transformer Balanced LoZ XLR Outputs (Line Level and Mic Level)

• Pin 1 Ground Lifts

• WIll drive line level direct to converters and DAWs, no mic preamp needed
  
  FATBOY TUBE DI SPECIFICATIONS:

  • Frequency Response 7Hz – 30kHz +/- 1 dB

  • Input impedance: 1M ohms

  • Gain range: 27-28dB

  • Maximum Output Before Clipping +18 dBu

  • Noise (EIN): less than -113dB

  • Distortion: Less than 0.15% 1KHz 1V

  • Power Requirements: 100/120/VAC – 18W (24VAC)

  • Dimensions (W x H x D) 5.4” x 2.6” x 8” • Weight 5 lb. (2.27 kg.)

Microphone Preamps are the hammers of the recording process. We set out to build a better hammer. This is not a a cheap copy of the preamp de jour or a vintage clone. It does have roots in vintage design practices and superior building techniques; featuring quality parts that have undergone extensive R&D listening tests. The only transformer in the audio path is the mic input transformer, much like the legendary Martin Sound MSS-10 and The Mastering Lab Pre. The Magic Pre shares the same design heritage as these world class units.

The Magic Pre 4100 is a four channel discrete Class A Mic Preamp that accurately captures the true essence and quality of fine instruments and voices. The biggest feature is there is not a bunch of unneeded fluff and features to take its toll on the sound. Nothing gets in the way of your sound! Pure and simple, the Magic Pre 4100.

You won't find an all discrete mic pre at this price and with this sound anywhere else on the market.

MAGIC Pre 4100 FEATURES:

• All Discrete Class A Classic Design

• Not a clone

• High quality, accurate, Sifam VU Meters

• +48v Phantom Power (decouples completely from transformer)

• -20 dB Pad (complete bypass in off position)

• Silver Teflon & Mogami™ Interconnect wire where applicable

• Hand Built in the USA

• Only the highest quality electronic parts that vetted by years
  of triple blind R&D listening tests
  
  MAGIC PRE 4100 SPECIFICATIONS*:

  • Frequency Response 5Hz – 35kHz (+/- 1 dB)

  • Gain range: 55dB

  • Maximum Output +24 dBu

  • Noise (EIN): less than -121dB

  • THD+N: <.02% 1KHz 1V

  • Power Requirements: 100/120/220/240 VAC

  • Dimensions (19 x 1.75 x 9)
    

  *Due to possible improvements, upgrades or availability of components, all specifications are subject to change.